The e 865S Handheld Supercardioid Condenser Microphone with On/Off Switch from Sennheiser represents the first condenser microphone in the acclaimed evolution series. A live performance, lead vocal microphone, the e 865 easily cuts through high-on-stage levels by virtue of its detailed and natural 40 Hz to 20 kHz reproduction and superb transient response.





Its smooth supercardioid polar pattern rejects feedback with low, off-axis coloration. The e 865 withstands sound pressure levels of up to 150 dB and deftly suppresses pop noise. While it picks up the finest sonic nuances, the e 865 is at the same time rugged, benefiting from high-quality workmanship and a robust all-metal housing.The Auray MS-5230F Tripod Microphone Stand with Fixed Boom features durable, steel construction. The 31.5" boom arm allows you to angle the mic however you need it. An ergonomic twist-action clutch helps adjust the height of the stand, while the reinforced tripod base and nonslip feet keep it firmly and sturdily in place. The Auray MS-5230F mic stand collapses for easy transport.The black Kopul Premium Performance 3000 Series XLR Male to XLR Female Microphone Cable (20') is designed to be an extremely quiet and flexible cable that is ideal for the most demanding live sound and performance applications. The cable is engineered to be durable and provide protection against EMI, RFI, and static noise. While the cable's color-coding affords the ability to quickly differentiate between multiple connections onstage, it provides a pleasant aesthetic quality at the same time.





Premium Performance 3000 Series cables are made from 24-AWG OFC copper wire that's wrapped with PE insulation and a conductive PVC inner shield. A cotton-yarn inner layer helps reduce electrostatic and microphonic noise. The 95% dual-spiral shielding makes the cable resistant to EMI and RFI noise. The Neutrik XX silver connectors provide a high level of connectivity, and all the solder connections are shrink-wrapped for protection.The black Auray WHF Series Foam Windscreens are designed to reduce unwanted broadband wind noise and vocal pops with minimal high frequency loss.





This WHF-158 Foam Windscreen is designed for use with many common handheld microphones with a 1-5/8" diameter head. The density of the specialty acoustic foam is optimized to help protect the microphone element from air bursts without muffling the sound.





When used on a handheld microphone, this windscreen is effective in minimizing wind noise and plosive sounds. It is most effective in calm to light breeze conditions (0 to 7 mph) and can be used indoors for protection against drafts caused by air-conditioners. Users can generally expect a 4 to 8 dB reduction in wind noise with very slight dampening of high frequencies. For most applications, the very slight high-frequency dampening is a worthwhile exchange for the notable wind noise reduction.





The WHF-158's foam is hypoallergenic and washable and helps prevent moisture and dirt from damaging your microphone. The windscreen is designed to fit microphones from Shure, Electro-Voice, AKG, Audio-Technica, Audix, Beyerdynamic, Sennheiser, Neumann and others.





The WHF-158 Foam Windscreen for 1-5/8" Diameter Microphones is an effective solution for basic wind protection.The WMC-100 Wide Mouth Case from Auray is designed to hold and protect your microphone and accessories such as cables, mic clips, shock mount, small audio recorder, memory cards, and more. This wide mouth case features a single compartment with a fabric-hinged lid that closes with a wrap-around zipper on three sides.





With a length of 11.5", the WMC-100 case can accommodate a long-handled interview microphone while remaining roomy enough for a mic flag, too. Smaller items can be secured in an interior storage pouch under the top lid with a touch-fastening tab closure.





For added shock and impact protection, there's also an inner layer of foam padding. The interior is lined with faux fur to prevent scratches. To help guard against impact, dust and moisture, the exterior of the case is made of 600D ballistic nylon.





To reinforce and maintain the case's shape, the exterior top and bottom circumferences feature a thin, black, plastic piping. Also on the outside of the case is a wrist-strap handle for hands free carrying.